Study of the strengthening effect of nano-sized bubbles finely dispersed in a metal matrix on the properties of this matrix and analysis of the interaction mechanism between sliding dislocation and the stress field around the bubbles.
The mission of "euroagri+" is to assist the application of innovation and technologies within the agriculture, food and feed sectors in order to strengthen european competitiveness.
Dds oriented automation agents will be designed and implemented. These agents are to execute supervisory control actions now belonging to the operator, thus increasing autonomy of industrial units and so decrease dependence of unit's efficiency and safety upon the human factor.
30% of the global production of viscose fibres is used in blends with polyester. In this project, special viscose fibres, which are more environment-friendly and intended for use in blends, will be developed to replace the standard viscose fibre.
The main objective is to provide scientific and technological support, and general technical assistance to european smes wishing to integrate micro and nano technology into their products. Non-european countries will also be made aware of minatuse activities.
A system for monitoring environmental data (air, water, soil) will be developed and tested. The data transfer and presentation will be made possible using the internet or intranet.
New tampons and the basic steps in their manufacturing will be developed. These new generations of tampons will maintain the natural conditions of their environments and provide antimicrobial and antifungicide properties.
Development of biopolymers from waste wood biomass (biopur)
There are two main challenges: 1. To become sustainable by reducing resource consumption, managing transport and utility networks in a sustainable way, reducing environmental and man-made impacts, improving safety and security and protecting cultural heritage; 2. To become a demand-driven sector.
To develop a system capable of autonomous accurate placement and mounting of panels. This will ensure better quality of the assembly and reduce the risks of injuries, thus saving material and construction time.